Uhlelo Lokukhuphuka Ngokuzenzakalelayo Lwe-Hydraulic (ACS): Isixazululo Esiphelele Sokwakhiwa Kwezakhiwo Eziphakeme Nezakhi Ezinkulu

Uma kukhulunywa ngokwakha izitezi eziphakeme, imibhoshongo yamabhuloho, izitshalo zamandla enuzi, noma izakhiwo ezinkulu zezimboni, ukusebenza kahle, ukuphepha, kanye nokunemba akunakuxoxiswana ngakho.Uhlelo Lwethu Lokukhuphuka Ngokuzenzakalelayo Kwe-Hydraulic (ACS)ichaza kabusha amazinga okwakha ngokuqeda ukuthembela emishinini yokuphakamisa yangaphandle, ivumela ukukhuphuka okuhambisanayo okusebenzisa amandla akho, okunciphisa isikhathi sephrojekthi futhi kunciphisa izindleko zabasebenzi.

Kungani i-ACS Ivelele: Izinzuzo Eziyinhloko

Ukukhuphuka KwethuUmsebenzi wefomuUhleloiklanyelwe ukuxazulula izinkinga ezinkulu zokwakha ezindaweni eziphakeme, inikeza inani elingenakuqhathaniswa:

Ukukhuphuka Okwanele: Isebenza ngohlelo oluhlanganisiwe lwe-hydraulic jacking,uhlelo lokuzenzela ukugibelakwenza uhlaka lwefomu kanye nomzila wokuqondisa “kukhuphuke” omunye nomunye—akukho makhreyini, akukho zikhuphu ezengeziwe, ukusebenza okubushelelezi nokuzimela kuphela.

Ukuphepha Okungaguquki: Inamathela ezindinganisweni zokuphepha zomhlaba wonke eziqinile, ngaphandle kwengozi yokutsheka noma yokungazinzi ngesikhathi sokukhuphuka.

Ukulethwa Kwephrojekthi Okusheshayo: Ikhuphuka ngo-~300mm/min, isheshisa inqubekela phambili iye ezinsukwini ezi-5 ngesitezi ngasinye (ngokwesilinganiso). Uhlaka luhlangana kanye bese lukhuphukela phezulu, lugwema ukuqaqwa/ukufakwa kabusha okuphindaphindiwe.

Ukunemba kanye nekhwalithi: Kunciphisa amaphutha esakhiwo ngokulungiswa kokuphambuka kwesendlalelo ngesendlalelo, kuletha izindawo zekhonkrithi ezinobuso obuqondile ezingadingi ukuqedwa ngemva kokuqeda.

Ukonga Isikhala Nezindleko: Umklamo omncane unciphisa ukuxinana kwendawo; izingxenye ezingasetshenziswa kabusha (izingxenye ze-anchor, i-guide rails) kunciphisa imfucuza yezinto ezibonakalayo kanye nezindleko zesikhathi eside.

Umkhiqizouchungechunge: LG-100 kanye ne-LG-120 

Sinikeza amamodeli amabili asebenza kahle kakhulu ukuze ahambisane nezidingo ezahlukene zephrojekthi—kusukelaphezulu-ukwakha izakhiwo zibe izakhiwo ezinde kakhulu. Zombili zakhiwe ngezinto zokwakha zezinga eliphezulu futhi zihlolwa kanzima ukuqinisekisa ukuqina.

I-LG-100 LG-120

Izingxenye Eziyinhloko Nezinhlelo: Zakhelwe Ukuthembeka

Ifomu Lokukhuphukaihlanganisa izinhlelo ezine ezingaphansi ezisebenza kahle kakhulu, ngayinye eyenzelwe ukusebenza ngokuvumelana okuphelele—ukuqinisekisa ukusebenza okuzinzile, ukulungiswa okulula, kanye nokuphila isikhathi eside kwenkonzo.

1. Uhlelo Lokwenza Ifomu: Olulula, Oluqinile, Noluguquguqukayo

Uhlelo lwefomu “ubuso” beIfomu lokuzikhwela, eyenzelwe ukusebenza kahle ezindaweni eziphakeme kanye nokuqeda ukhonkolo okuseqophelweni eliphezulu:

• Izinto Eziyinhloko: I-plywood yokhuni elula kodwa eqinile (ubukhulu obungu-15mm/18mm), ilungele ukunciphisa isisindo sohlaka ngaphandle kokwehlisa amandla.

• Izici Zokuklama: Ukuhlanganiswa kwe-Modular kuvumela ukwenza ngezifiso izindonga eziqondile, amakholomu, noma izindawo ezigobile. Imishayo yokhuni (ejwayelekile ye-H20) isebenza njengezimbambo eziqondile, ezixhunywe kuma-waler ensimbi ngama-clamp e-flange ukuze kusekelwe okuzinzile.

• Ukusebenza: Amaphaneli anikeza ukumuncwa kwamanzi okuhle kakhulu kanye nokuvuleka komoya, avimbela amaphutha obuso bekhonkrithi. Asekela ukujika okungafika ku-35, okwenza kube ngcono ukusebenza kahle kwezindleko.

2. Uhlelo Lokubambelela: “Umgogodla” Wokukhuphuka Ngokuphepha

Uhlelo lwe-anchor luyavikelauhlelo lwefomu lokugibela oluzenzakalelayoesakhiweni, ukumelana nemithwalo eqondile, ingcindezi evundlile, kanye namandla okugoba. Kuhlanganisa izingxenye ezingasetshenziswa kabusha ukuze kuqhubeke isikhathi eside:

• Izingxenye:Ihangeamapuleti (D26.5/D20), enamandla aphezuluinduku yokubopha(D26.5)/D20),Ukuthambaamabhawodi (M42/M36), kanye namakhoni okukhuphuka (M42/26.5 noma M36/20).

• Izinzuzo Eziyinhloko: Izinketho ezimbili zokuhlanganisa ezifakiwe (Uhlobo A lwemithwalo esindayo, Uhlobo B lwemithwalo ejwayelekile) zivumelana nezidingo zephrojekthi. Amakhoni okukhuphuka ambozwe nge-ejenti yokukhulula ukuze kube lula ukususa nokusebenzisa kabusha.

• Ukuphepha: Amabhawodi athwala imithwalo ayacinywa futhi atholakale amaphutha (ubulukhuni be-RC25-30) ukuqinisekisa ukuthi angakwazi ukubhekana nokucindezeleka okukhulu kokwakhiwa.

3. Uhlelo lwe-Hydraulic: Ukunika Amandla Ukukhuphuka Okubushelelezi Nokuvumelanisa

Uhlelo lwe-hydraulic “luyinjini” yeifomu lokukhuphuka elizenzakalelayo, okunikeza amandla aqhubekayo okukhuphuka okungenamthungo:

• Izingxenye Eziyinhloko: Isiteshi sokupompa se-Hydraulic (imoto engu-1.5KW, i-AC380V), amasilinda asebenza kabili, ama-commutator aphezulu/aphansi, kanye namapayipi anomfutho ophezulu (uxhumano lwe-M14×1.5).

• Ukusebenza: Izinga lokugeleza kwesiteshi sokupompa elingu-2L/min (ngeyunithi ngayinye) lenza isivinini sokukhuphuka esingu-~300mm/min. Ama-commutator alawula indlela yamandla (uhlaka lokuphakamisa noma isitimela sokuqondisa), okwenza kube lula ukukhuphuka ngakunye.

• Ukuphepha: Ingcindezi inqunyelwe ku-≤16MPa ngesikhathi sokusebenza; ikhonsoli ezinikele enama-gauge okucindezela iqinisekisa ukuqapha kanye nokulungisa amaphutha ngesikhathi sangempela.

4. Uhlelo Lwezibambo: Ukusekelwa Okuzinzile kanye Nokusebenza Okugcwele

Uhlelo lwe-bracket luhlinzeka ngokuqina kwesakhiwo kanye namapulatifomu omsebenzi anezingqimba eziningi, okususa isidingo sokufakwa kwe-scaffolding yesikhashana:

• Izingxenye Eziyinhloko: Ama-tripod athwala imithwalo (anezibambo ezivundlile ezingama-140mm ububanzi),isethi ebuyisela emuva(Ububanzi bokulungiswa obungu-600–700mm),ukukhuphukaizinsimbi (insimbi ye-H150×150 Q235),idivayisi enamathiselwe odongeni, ama-waler ayinhlokokanye namapulatifomu okusebenza (phezulu, okuyinhloko,okuphakathi nendawo, imisiwe).

• Izici Eziyinhloko: Ibhulaki elithwala ukulayishaisixhunywe ngensimbi ye-H15 ukuze yakhe uhlaka oluhlanganisiwe; isethi ebuyiselayo ivumelasifomu lokuhoxisa ukuze kuhlanganiswe futhi kuhlanzwe ukuqinisa insimbi.

• Amapulatifomu: Ipulatifomu ngayinye ayisheleli, ihlolwe umthwalo, futhi ifakwe izivikelo—iqinisekisa ukuphepha kwabasebenzi ngenkathi inikeza indawo yokuthulula ukhonkolo, ukulungiswa kwefomu, kanye nokugcinwa kwezinto.

Ukuhamba Komsebenzi Okulula Kokukhuphuka: Londoloza Isikhathi Nomsebenzi

Ifomu lokukhuphukakulandela inqubo elula nephindaphindayo enciphisa ubunzima bendawo. Ithimba elilodwa lingaqeda ukukhuphuka ngamahora, hhayi izinsuku:

1. Ukulungiselela Ngemva Kokukhonkolo: Ngemva kokuthulula ukhonkolo, susa ifomu bese ulibuyisela emuva usebenzisa idivayisi yokunyakaza ebheke emuva.
2. Ukufakwa Kwesivikelo: Faka amabhawodi athwala umthwalo, izisekelo ezifakiwe, kanye namakhoni okukhuphuka esikebhenikugcinweimigodi (eshiywe yintaba engaphambili).
3.  UkukhuphukaUkuphakamisa Isitimela: Lungisa ama-commutator ukuze aphakamise isitimela sokuqondisa siye endaweni entsha ye-anchor; sikhiye endaweni yaso ngezikhonkwane zokuphepha.
4. Ukukhuphuka Kohlaka: Setha kabusha ama-commutator ukuze aphakamise lonke uhlaka eceleni kwesitimela somhlahlandlela; qinisekisa ukuvumelanisa bese ukhiya uhlaka.
5. Ukuqinisa Nokuhlela Ifomu: Bopha i-rebar, hlanza i-formwork, ufake i-release agent, bese ubeka kabusha i-formwork ukuze kuthululwe ukhonkolo olandelayo.

Ikhwalithi Nokuphepha: Ngale Kwezindinganiso Zemboni

Sibeka phambili ukuphepha nokuqina kuzo zonke izingxenye, siqinisekisauhlelo lokwakheka kwefomu lokukhwelaihlangabezana noma idlula imithethonqubo yokwakha yomhlaba wonke:

• Ukuhlolwa Kwezinto Ezisetshenziswayo: Zonke izingxenye zensimbi (izinsika zokuqondisa, ama-tripod, amabholti) zenziwe nge-Q235 noma i-alloy yebanga le-10.9, enokumelana nokugqwala kanye nokuhlolwa kokumelana nomthelela.

• Izinqubo Zokuphepha: Ukukhuphuka kuvunyelwe kuphela uma amandla ekhonkrithi efinyelela ku-≥10MPa; akuvunyelwe emimoyeni yezinga elingaphezu kuka-8, iziphepho, noma ukubonakala okuncane.

Ubambisene noYancheng Lianggong: Umhlinzeki Wakho We-ACS Othembekile

Ukukhethaifomu lokuzikhuphukelakusho ukubambisana nenkampani eletha okungaphezu nje kwemikhiqizo—sihlinzeka ngosekelo oluphelele lwamaphrojekthi omhlaba wonke:

Izixazululo Ezingokwezifiso: Umthungiuhlelo lwefomu lokugibela oluzenzakalelayongezidingo ezihlukile zephrojekthi yakho (ukuphakama, umthwalo, isakhiwo) nethimba lethu lobunjiniyela bangaphakathi.

Ukulethwa Komhlaba Wonke: Ukuthunyelwa okusheshayo emazweni angaphezu kuka-50, ngokusekelwa okuzinikele kokuthutha ukuze kugwenywe ukubambezeleka.

Isevisi Yangemva Kokuthengisa:Tukwesekwa kwezobuchwepheshe, ukulungiswa kwendawo, kanye nokufakwa kwezingxenye ukuze kugcinwe iphrojekthi yakho isendleleni efanele.

Ukulungele ukuphakamisa isakhiwo sakho esinde ngeuhlelo lokwakheka kwefomu lokukhwelaXhumana nathi namuhla ukuthola isiphakamiso sobuchwepheshe samahhala, isilinganiso esenziwe ngokwezifiso, noma idemo yomkhiqizo obonakalayo!

Ulwazi lokuxhumana

Inkampani: Yancheng Lianggong Formwork Co., Ltd.

Iwebhusayithi:https://www.lianggongformwork.com    https://www.fwklianggong.com    https://lianggongform.com

I-imeyili:ukuthengisa01@lianggongform.com

Ucingo: +86-18201051212

Ikheli: No.8 Shanghai Road, Jianhu Economic Development Zone, Yancheng City, Jiangsu Province, China